mamosuke一覧

MoonShell Version2.00 beta.7リリース

Moonlight氏がMoonShell Version2.00 beta.7をリリースしていました。【記事


MoonShell Version2.00 beta.7

EZ4, SC, R4, AK2, AKRPG, SCDSONE で起動できないことがあるバグを修正しました。
ダウンロード moonshell200beta7.zip (36,619,891byte) MD5 取扱説明書 更新履歴 ChangeLog(Poor) 
取扱説明書のダウンロード moonshell200beta7_readme_JPN.zip (119,809byte)


なんだかMoonlightさんは状態がおもわしくないようです。何があったのかは分かりませんが心配です。昨日はまだ生きてますとか書いてたし…


EZ5i core updateがリリース

GBAtempで、EZ5 1.90 open beta 9のリリースともにEZ5i core updateのリリースを伝えていました。【記事

ファームのアップデートはいつもの事ですので割愛いたします。気になったのはEZ5i core updateです。

EZ5三兄弟


Finally, also available is an update for the EZ5i internal loader. This is a new feature for the EZ5i only (earlier models of the EZ5 have no use for this) and as this is the first of the kind (outside beta releases) an explanation is necessary.
EZ5iの内部ローダーのアップデートです。EZ5i専用になります(EZ5といった旧モデルには使用できません)。今回は少し説明が必要です。

For the EZ5i the EZTeam added the ability to update the very core of the cart (that is to say how the EZ5 interacts with the DS and the internal hardware, a feature they are claiming as unique among present flashcarts), this update aims to fix some problems with SDHC reading and fix detection of the EZ5i in the DSi a small number of users have had.
EZ5i用にEZチームはマジコンのコア部分を更新できる機能を追加しました。(つまりEZ5がどのようにDSとその内部のハードウェアにアクセスするのかという部分の更新です。数あるマジコンの中でも他にはない特徴です)今回の更新はSDHCの読み込み時の問題と、DSiでの使用時にEZ5iが検出できないことがあった不具合(若干のユーザーから報告有り)に対する修正です

To use simply extract the .nds file to the root of the card (the first directory as in e:\ or wherever your card reader puts the memory card) run it and follow the on screen instructions. Users are strongly advised to have a fully charged DS before undertaking this.
やり方は簡単で、解凍してできた.ndsファイルをマイクロSDカードのルートにコピーし画面指示に従って実行するだけです。必ずDSを十分充電した上で行うようにしてください。


代表的なマジコンR4に販売差し止め判決が出ており、任天堂は今後他のマジコンに対しても同様の措置をとってくる事は明白ですのでおおっぴらには書きませんが、これって任天堂が△△△でマジコンを■■しないように●●するのを回避する機能だったりするんでしょうか。
穴埋めクイズじゃないですよw


WiiのNANDバックアップ〜WiiND v1.0リリース

WiiNEWZで、WiiのNANDをバックアップできるWiiND v1.0のリリースを伝えていました。【記事


WiiND v1.0

This app dumps the NAND to USB and SD.
If a USB device is plugged in it will attempt to dump to said USB device.
If no USB device is inserted it will attempt to dump to the SD card
このアプリはNANDメモリーをダンプしてUSBやSDスロットに吐き出せます。USBデバイスを差せばそのUSBデバイスにダンプされます。USBに何も差さなければSDカードにダンプします。

To extract the dump you need your NAND AES KEY, you can get that by using Xyzzy. If you have ran xyzzy, it will have created a file named “keys.txt” in the root of your SD card. Open it and look for the NAND AES KEY. Now, make a folder called “keys” in C:\ and open your favorite hex editor. Copy the NAND AES KEY from “keys.txt” into your hex editor and save the file as “nand-key.bin” in the keys folder.
Now just run “Extract.exe” and select the “nand-dump.img” file. It will copy the NAND dump file to the directory where Extract.exe is and extract it.
ダンプしたものを解凍するためにはNAND AES KEYが必要になります。NAND AES KEYを入手するためにXyzzyを使用します。Xyzzyを起動すると”key.txt”という名前のファイルがSDカードのルートに作成されます。ファイルを開いてNAND AES KEYを探してください。まず、”keys”という名前のフォルダをドライブのC:に作成し、お好みのバイナリエディタを用意してください。”keys.txt” からNAND AES KEYをバイナリエディタ上でコピーし、”nand-key.bin”という名称で保存をして先ほど作成した”keys”フォルダに入れてください。
あとは”nand-dump.img”を指定して”Extract.exe”を起動するだけです。NANDをダンプファイルはExtract.exeがあるディレクトリに解凍されます。

wiind

Attached Files
WIiND.zip (2.81 MB)


Waninkoko氏のNAND dumperとの一番の違いはどこにダンプするかどうかみたいです。
ソース元のWiiBREWには
Waninkoko to original make the NAND dumper
との記載があります。

やはり簡単に扱えるUSBポートやSDカードスロットが使える利点は大きいです。