mamosuke一覧

DSiの1.4ファーム突破 EZ5iとHyper-R4iがファームウェアリリース…えっ?クローン??

GBAtempで、DSiの1.4ファームでの起動に対応したEZ5i v12 internal firmwareがリリースされたことを伝えていました。最初に突破したのはEZflashチームでした。【情報源:GBAtemp


EZ5i v12 internal firmware released- DSi 1.4 works
fixes SDHC problems of V11. Also moonshell 2.00 soft reset.
EZ5i v12 インターナルファームウェアリリース – DSi 1.4で動作
V11のSDHCの問題を修正。Moonshell 2.00のソフトリセットも

The EZTeam have released v12 of the EZ5i internal firmware/loader which allows EZ5i carts to run on DSi firmware 1.4, it also solves the problems with the [705] hardware revision and SDHC memory that yesterday’s v11 had (it also bypassed 1.4 making them the first team to release a software update to allow their cards to run on a DSi with 1.4 firmware). If you updated to v11 yesterday and have a [705] hardware revision EZ5i then you will need a SD card to update again.
EZチームはEZ5iのマジコンをDSiのファームウェア1.4で起動できるインターナルファームウェア/ローダー V12をリリースしました。[705]ハードウェアの問題と昨日リリースしたV11にあったSDHCメモリーカードの問題も修正済です(DSiの1.4でマジコンが起動しない問題を解決するソフトウェアアップデートを一番最初にリリースしたことになります)。昨日のV11へアップデート済で[705]ハードウェアのEZ5iの場合SDカードで再度アップデートをお願いします。

Release notes
リリースノート

This is not the first EZ5i update but it is potentially one of the more important. It allows the EZ5i to work under a DSi using the 1.4 firmware but doing so presently requires that the cart use a proper icon and text from a game.
今回はEZ5iの初めてのアップデート、という訳ではありませんが、今までで一番重要度の高いものです。今回のアップデートでEZ5iはDSiのファームウェア1.4でも正常に動作しますが、現時点では適切なアイコンとテキストファイルをゲームから抜き出す必要があります。
Updating is as simple as running the ez5firmwreUP_V12.nds from the root of the EZ5i, naturally this requires something that works with the DSi like a DS, DS lite or DSi with firmware lower than 1.4, the whole procedure takes about 30 seconds although we do suggest that you charge your device and preferably power it from the wall as well.
アップデートするのは非常に簡単で、EZ5iに入れたmicroSDカードのルートにコピーしたez5firmwreUP_V12.ndsを起動させるだけです。DSiで1.4未満のファームウェアのものやDSLite、DSのようにEZ5iが動作する個体で先にアップデートをする必要があります。アップデートは30秒程度で完了しますがコンセントから充電しながら実行することをおすすめします。

A check was also added so you can no longer downgrade to an earlier firmware and brick your EZ5i (it should just hang if you try).
チェック機能も追加されたので以前のファームに戻す必要もありませんしEZ5iがbrickすることもありません(悪くても固まる程度です)。

This is just the internal loader so you can continue using any kernel that works with the EZ5i.
インターナルローダーですのでEZ5iで動作するカーネルであればどれをお使いいただいても問題ありません。

EZ5 moonshell 2.XX soft reset
EZ5 moonshell 2.XX ソフトリセットについて

Also available since last post is a soft reset plugin for moonshell, the EZTeam sent Moonlight some source code and he made one for use. This should work for all EZ5 models
前回からmoonshellのソフトリセットプラグインが使用可能になりました。EZチームがMoonlight氏にソースコードを送って、彼が機能するように作ってくれました。このプラグインはEZ5の全モデルで動作します。


しかしGBAtempではEZ5iのちょっと前にHyper-R4iがDSiのファームウェア1.4を突破していたことを伝えていました。【情報源:GBAtemp


Hyper-R4i works on DSi firmware 1.4x
First commercial cart to do so
Hyper-R4iがDSiのファームウェア1.4で動作

The Hyper-R4i team have released a new firmware that enables previous models of the Hyper-R4i to work on DSi firmware 1.4x. It is unknown how they got it to work and whether or not the firmware includes copyrighted data, so we will not be hosting the firmware for the time being, but you can download it at the link below.
Hyper-R4iチームは現在すでに販売されているHyper-R4iをDSiのファームウェア1.4で起動させることができる新ファームウェアをリリースしました。Hyper-R4iチームがどんな手段で起動させるに至ったのかが不明ですし、ファームウェアに著作権が絡むデータが入っているのかどうかも分かりません。その可能性もあると思っているのでとりあえずファームウェアをミラーしておくのはやめておきます。リンクからならダウンロードできます。

This firmware will work on all previous Hyper-R4i models, and will be flashed and available for immediate use on all new Hyper-R4i carts.
このファームウェアは全Hyper-R4iモデルで動作しますのでファームウェアの書き換えもHyper-R4iすべてに使用可能です。

Update: It appears the Hyper-R4i is a EZ-Flash clone, but this is still good news to anyone that might have picked one of these carts up.
更新情報:なんとHyper-R4iはEZ-Flashのクローンでした。とはいうものの対策を回避したマジコンが増えたというのは良いニュースです。


クローンだったんだ…microSDスロットの位置が違うので基板が別物だと思ってました。
どっちが先?という話ならEZチームでしょうね。それにしてもHyper-R4iチームがGBAtempに信頼されていないのがよく分かります。
どうやらマジコンを起動不可にした対策は内蔵ファームウェアのアップデートで回避できることが証明されたようです。これで同じようなファームアップ機能を持っているマジコンが任天堂のマジコン対策を突破するのも時間の問題でしょう。
任天堂は別の方法で次の一手を早急に検討する必要がありそうです。傍観者としてはこのイタチごっこが楽しかったりします。


2009年8月15日のニュース

●VG247は、Wedbush MorganのアナリストMichael Pachter氏がVG247のポッドキャストで語ったこととして、日本では8月8日以降小売店がh新規にPS3を発注できなくなっていたがイギリスでも似たような話が出てきているのでPS3はやはり値下げをして新型を投入するだろうと伝えていました。イギリスでは8月末まで小売店にPS3のオーダーをさせてくれないようです。

●Maxconsoleで、7月はPS2がPS3より販売台数が多かったことを伝えていました。販売されていない8月はもっと酷いことに…

●MCVで、マイクロソフトのEMEA担当副社長Chris Lewis氏がPS3を値下げされてもマイクロソフトの計画には影響しないと語ったa>ことを伝えていました。Xbox 360自体の8月末値下げの計画を念頭に置いているようです。

●VGChartzは、ある情報筋からの情報としてPS3は製造コストを70%削減しても利益が出ないことを伝えていました。
PS3の初期製造コストは1台あたり1150ドル〜1250ドルのはずで、70%削減できたとしても現時点での製造コストは1台あたり360ドル程度にしかならないというのが根拠のようです。

●POCKETGAMERで、PSNでダウンロード販売されるPSP GoのゲームはiPhoneのゲームに比べて安価であると伝えていました。価格は1、2、5ユーロという設定のようです。AppleのApp Storeで一番高額なのはThe Sims 3 and Real Racingの9.99ドルだそうで、それと比較しても安価であると伝えています。なんでドルとユーロで比較しているのか分かりませんが、為替相場考えたらそんなに激安でもないと思いますけどね。
すでに50社以上がPSNからのゲームコンテンツ提供の契約をしているそうです。


PSP goのサンプル版レビュー

Eurogamerが、秋に発売される予定のPSP goのプレリリース版サンプルを入手しレビューを掲載していました。【情報源:Eurogamer


PSPgo: New firmware, new connections
PSPgo: 新ファームウェア、新しい接続方法

Sony’s PSPgo is set to launch with a firmware upgrade featuring new options andtweakables. Expect a full video reveal in a forthcoming Eurogamer TV show, alongwith fuller hands-on, but in the meantime, check out this complete technical readout of the new, fully armed and operational PlayStation Portable.
ソニーのPSPgoは、新たなオプションと接続方法を特徴とするファームウェアにアップグレードされて登場予定です。Eurogamerで公開予定のレビュービデオですべてが明らかにしていく所存ですが、今回はこの新型プレイステーションポータブルを技術面から追った記事をお楽しみください。

The pre-release sample of the new hardware arrived with an unreleased firmware revision: 5.70. This may or may not be the system software that ships with the retail unit coming on 1st October, but either way it seems certain new firmware ispart of the launch. Regardless, 5.70 does feature a number of changes over the current 5.51 operating system, albeit somewhat slight.
以前あったサンプルには一般には公開されていない5.70というファームウェアバージョンが搭載されていました。10月1日に発売される製品版にこのファームウェアが搭載されるかどうかは不明ですが、いずれにせよ新しいファームウェアが搭載されることでしょう。5.70かどうかは別にして現行の5.51ではないバージョンになるでしょう。

Not surprisingly, it’s the Settings area of the XMB that gets the lion’s share of the changes:
当然のことながら、XMBの各種設定画面が変わります:

* Network Update is now listed as System Update, but, curiously, has the same options.
*ネットワークアップデートがシステムアップデートとして表示されますが、基本的に内容は同じです。
* Video Settings obviously doesn’t have the first four UMD-related toggles.
*ビデオ設定はUMDにかかわる設定がなくなっています。
* System Settings now has a “Your Birth Date” option (second from top), and a “Display Panel Close Option” toggle, which allows you to set it to either “Standard” (goes to a clock graphic) or “Enter Sleep Mode”. Also “Battery Information” seems to be gone, as do UMD-related options, but there’s a “Format System Storage” option in addition to the usual Memory Stick format option.
*システム設定で”誕生日”入力オプションが上から2番目に増えました。 また”ディスプレイパネルを閉じたときの動作”項目が増えていました。”標準”(時計画面を表示)と”スリープモードに入る”を選択できます。また”バッテリー情報”やUMDにかかわる設定項目がなくなっているようですが、かわりにメモリースティックのフォーマットオプションに”内蔵メモリー領域をフォーマット”するオプションが加わりました。 
* Power Save Settings loses the “Backlight Auto-Adjust” option for some reason.
*省電力設定の”バックライト自動調整”オプションが何らかの理由があってのことだと思いますがなくなっています。
* There’s a new “Bluetooth Device Settings” entry, which consists of a toggle for switching Bluetooth on and off and a “Manage Bluetooth Devices” entry.
*”Bluetoothデバイスの設定”の項目が新たに追加されています。Bluetoothデバイスのオン・オフや”Bluetoothデバイスの管理”があります。

All other elements of the XMB are identical to the current 5.51 firmware, asidefrom a new “System Storage” folder similar to the “Memory Stick” one, which, asyou might imagine, allows access to the PSPgo’s internal flash storage. Hookingup the PSPgo to a Mac via USB, we find that the total available storage available to the user is 14.74GB, formatted in the FAT32 configuration (hence introducing a 4GB file-size limit – unlikely to be a concern to any PSP user). All this gives the PSPgo a marginal memory edge over a 16GB iPod Touch (mine comes in at 14.64GB total capacity).
その他、現行の”メモリースティック”に相当する”システムストレージ”フォルダ以外は現行5.51ファームウェアのXMBの全く同じです。”システムストレージ”フォルダは読んで字のごとくPSP goの内蔵フラッシュメモリーにアクセスするためのものです。USBでPSP goをMacに繋いでも使用可能な総容量は14.74GBとなります。フォーマット形式はFAT32のため1ファイルあたり4GBまでという制限がありますがPSPユーザーにはあまり関係がないでしょう。16GBのiPod Touchと比べるとPSPgoは少し容量的に不満です(今回のPSP goはトータル14.64GBだたっため)。

We also measured file transfer times via USB, to the internal flash memory and also to the M2 memory card, using a 699MB file (715,647KB). The M2 transfer camein at 93 seconds, while the copy to the internal flash drive took 95 seconds, soeffectively there’s next to nothing in it.
また、 USB経由のファイル転送時間についても調べてみました。699MB(715,647KB)のファイルを内部のフラッシュメモリーとM2メモリースティックに転送して測定してみたところ、M2メモリースティックへは93秒、内蔵フラッシュメモリーへは95秒でした。事実上差はほとんどありません。

What is intriguing is that Sony has opted out of using a conventional USB cableformat on the new handheld. The PSPgo itself uses a wider, thinner connector forthe console, terminating in the standard USB connector. So, similar to the iPhone and iPod Touch, it’s proprietary cable time. It also appears as though Sony has moved away from the old AV port that debuted on the PSP-2000 – there’s a common-or-garden 3.5mm stereo jack connection for headphones only, not the more traditional extended interface with its support for external remotes and the like.
注目すべきはソニーが一般的なUSBケーブルを新型機には採用しなかったことです。PSP goは今まで標準だったUSBコネクターではなく、それより幅広で薄いコネクターがついています。iPhoneやiPod Touchと同様独自のコネクター形状です。同時にソニーはPSP-2000から搭載していたAVポート(ヘッドフォン用3.5mmのステレオジャックベースの拡張仕様)を廃止し、外部リモート機能をも備えたコネクターとしています。

Since the video output settings are still on the XMB, our guess is that Sony isindeed following Apple’s lead by consolidating all connections into that new wider, thinner interface, which we strongly suspect will form the basis for an iPod-style dock. All very nice, but it once again emphasises that this is somethingof a clean break from the old PSP hardware – not only will your UMDs not work, but your component cables are now obsolete in the new order, as are your Memory Sticks: PSPgo uses the newer, smaller, M2 format as found in a number of the SonyEricsson mobile phones.
映像出力設定はまだXMBにありますが、ソニーはこの幅広薄型の新コネクターでアップルのiPodと似たようなドッキングステーションを実は目論んでいるのではないかと予想しています。それはそれで魅力的ですが、忘れてはならないのは今までの周辺機器との決別をも意味しているのという事実です – つまりUMDを利用できないだけでなく コンポーネントケーブルやメモリースティックまで買いなおさなくてはなりません。PSP goはソニー・エリクソンの携帯電話にだけ採用されている小型のM2というフォーマットを新たに採用しているのです。

In terms of other interesting information we picked up… well, we’re going to assume that the final production PSPgo hardware won’t allow you to flash the firmware with a system update designed for the older handhelds. Bizarrely, the sample apparently does, which resulted in a rather snazzy-looking brick once the PSPgo’s previous trustees (who shall remain nameless) had finished with it – a sideeffect of which is that the rather intriguing-looking Gran Turismo demo includedon the flash drive didn’t work by the time the unit arrived in our possession, which – as you can imagine – we were really happy about…
その他興味を引く情報として取り上げたいのは…PSP goの市販製品はどうやら今までのPSPで実施されてきたシステムアップデートではファームウェアを書き換えできないようなのです。信じられないことに、今回借りたサンプル機がそうだったのですが、我々のところに届いたときにはフラッシュドライブにあるグランツーリスモが動作しなかったのです。どうやら我々の前にこのPSP goを借りていた方(名前は伏せます)が使い終わったときに一度brickさせていたようです。ご想像の通りですが、動かなかった時にはそれはもう…

On the plus side, the hard disk was loaded with a number of other demos, including office favourites WipEout Pulse and Ridge Racer 2, and we’ll be commenting onhow those feel on the new hardware, and doing our usual tour around and impressions of its exterior and how it works, in next week’s hands-on and EGTV Show.
良い情報もお伝えしておきます。内蔵フラッシュメモリーにはWipEout PulseとRidge Racer 2をはじめとしたデモゲームが入っていました。新型ハードウェア上で操作してみた感じやいつもおこなっているエクステリアのインプレッションや動作の様子といったレビューは来週お伝えする予定です。EGTVショウもお楽しみに。


システムアップデートのくだりが気にはなりますが、明言を避けている時点でそれなりの対策がなされている可能性があります。アップデートも個体識別でダウンロードだけとか?名称が変わっているのも気になります。

※注)メニュー名は勝手な翻訳です